1. Plug your memory Kingston key into a USB port on your computer.
2. Setup your CESAR-Lcpc software..
3. Start your software and make sure you are not in demonstration mode.

Setup your key

1. Download the setintel key driver: Sentinel_LDK_Run-time_setup.zip
2. Unzip the file.
3. Setup the key driver on the computer by running the HASPUserSetup.exe file and follow the instructions.
4. Once the installation successfully completed, connect your key to the USB port.

Setup your NetHasp key

1. Download and setup the setintel key driver: Sentinel_LDK_Run-time_setup.zip
2. Download the License Manager for nethasp key: HASP_License_Manager.zip
3. Unzip the file.
4. Setup the NetHasp license manager on the computer by running the lmsetup.exe file and follow the instructions. Choose the installation "as a service"
5. Connect your NetHasp key on the USB port only when the installation wizard prompts you to do it.

Configuration of the nethasp.ini file (recommended)

1. Download and unzip the file: nethasp.zip
2. Open the nethasp.ini file with notepad.
3. In the row : NH_SERVER_ADDR = xxx.xxx.xxx.xxx, substitute xxx.xxx.xxx.xxx by the IP address of your server.
4. Save the file in: C:\CESAR-LCPCv2021.0\bin\ and in C:\CESAR-LCPCv2021.0\Tmp\

Configuration of the nethasp.ini file (advanced user)

1. Download, unzip and setup DiagnostiX v1.10: DiagnostiX_Installer.zip
2. Run the utility . in the left panel choose "HASP" then nethasp.ini.
3. Activate the option "customized ini files"and enter the IP address of your server.
4. Save the file in: C:\CESAR-LCPCv2021.0\bin\ and in C:\CESAR-LCPCv2021.0\Tmp\

Setup the RUS-Memo utility for your single-user itech key.

1. Download RUS-Memo utility: RUS-Memo.zip
2. Unzip the file.
3. Please install the utility on the computer with your single-user key, by running RUS-CL-Memo.Setup.exe and follow the instructions

How to get the ID number from your single-user protection key:

1. Check that only your itech single-user key is connected on your computer.
2. Go to Start --> Programs --> itech --> RUS-Memo and run RUS
3. In the opening window click on the right button GetID
4. Check that in the Result box you get: Get Key ID: Operation successful.(0)
5. Then give your ID number from HASP ID field to your itech interlocutor.
6. Close RUS-Memo utility.

How to recode your itech single-user key:

1. Once you've forwarded the ID number (HASP ID) to your itech interlocutor, you will receive by mail a file Codes.xml
2. Copy the file Codes.xml in directory: "C:\Program Files (x86)\itech\RUS-Memo\Data".
3. Go to Start --> Programs --> itech --> RUS-Memo and run RUS
4. Click on the button Perform Update.
5. Check that in the Result box you get: Perform Update: Operation successful.(0)
6. You can close RUS-Memo.

Setup the RUS-Net utility for your NetHasp itech key

1. Download RUS-Net utility: RUS-Net.zip
2. Unzip the file.
3. Please install the utility on the computer with your NetHasp key, by running RUS-CL-Net.Setup.exe and follow the instructions.

How to get the ID number from your NetHasp protection key:

1. Check that your itech network key is connected to the server machine and that the Hasp license manager is running.
2. Go to Start --> Programs --> itech --> RUS-Net and run RUS
3. In the opening window click on the right button GetID
4. Check that in the Result box you get: Get Key ID: Operation successful.(0)
5. Then give your ID number from HASP ID field to your itech interlocutor.
6. Close RUS-Net utility.

How to recode your itech NetHasp key:

1. Once you've forwarded the ID number (HASP ID) to your itech interlocutor, you will receive by mail a file Codes.xml
2. Copy the file Codes.xml in directory: "C:\Program Files (x86)\itech\RUS-Net\Data".
3. Go to Start --> Programs --> itech --> RUS-Net and run RUS
4. Click on the button Perform Update.
5. Check that in the Result box you get: Perform Update: Operation successful.(0)
6. You can close RUS-Net.

• Teamviewer Support
• Teamviewer Demo